{"product_id":"daxenmix-double-sided-design","title":"DaxenMix Double-Sided Design","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBlock Draughts, Noise, Dust, And Energy Loss With The Easy-Install DaxenMix Door Draft Stopper\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDouble-sided leather and sponge construction blocking draughts from both sides simultaneously, 93cm length with 5cm central interval fitting standard door widths, abrasion-resistant fabric exterior for durability against weather and daily contact, peel-and-stick velcro adhesive installation requiring no tools and leaving no door damage, removable and repositionable for flexible use, and effective against rain, snow, dust, noise, and air conditioning or heating loss — the DaxenMix seals the gap beneath any door in minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLooking For A Door Draught Stopper That Blocks Cold Air From Both Sides Of The Door Gap?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe DaxenMix's double-sided design positions sponge-filled leather draught blocking material on both the room side and the corridor side of the door simultaneously — sealing the under-door gap from both directions rather than the single-side coverage that one-sided draught excluders provide, creating a more comprehensive seal that prevents cold air infiltration from beneath the door regardless of which direction the draught originates during cold weather heating seasons.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTired Of Heating And Cooling Bills Inflated By Air Escaping Under Your Interior Doors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe DaxenMix seals the gap where heated and air-conditioned air escapes between rooms — preventing the pressure-driven airflow that carries expensive conditioned air from heated or cooled rooms into adjacent unconditioned spaces throughout the building, reducing the workload on heating and cooling systems that must continuously compensate for the temperature loss that unsealed under-door gaps cause during extended heating and cooling operation throughout every season.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWant A Draught Stopper You Can Install Without Tools Or Permanent Door Modification?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe peel-and-stick velcro adhesive system attaches the DaxenMix to any door in three steps — measure the gap, peel the adhesive backing, and press the velcro strip to the door surface, then attach the draught stopper to the velcro for immediate sealing performance without drilling, screwing, or any permanent modification that damages the door surface during installation or leaves marks when the stopper is removed for repositioning or seasonal storage.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDouble-Sided Design Sealing The Under-Door Gap From Both Sides Simultaneously\u003c\/li\u003e\n\u003cli\u003e93cm Length Fitting Standard Doors With Leather And Sponge Construction\u003c\/li\u003e\n\u003cli\u003ePeel-And-Stick Velcro Installation With No Tools And No Door Damage\u003c\/li\u003e\n\u003cli\u003eBlocks Draughts, Dust, Noise, Rain, Snow, And Heating And Cooling Loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWHY CHOOSE DAXENMIX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDOUBLE-SIDED COMPREHENSIVE SEALING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe dual-side construction with 5cm central interval creates independent sealing contact on both the internal room face and the external corridor face of the under-door gap — addressing draught infiltration from both directions that single-sided alternatives leave partially exposed, and providing the symmetrical seal that doors with gaps variable across the width benefit from through even bilateral contact pressure during installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLEATHER AND SPONGE WEATHER RESISTANCE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe leather exterior combined with quality sponge interior provides the abrasion resistance that daily door contact and weather exposure require for long-term performance — the leather surface resisting the wear that fabric-only alternatives develop through repeated door sliding contact during regular daily opening and closing cycles, while the sponge core maintains compression recovery that keeps the seal effective throughout extended regular use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNOISE REDUCTION ACOUSTIC BENEFIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe sponge-filled leather construction absorbs sound transmission through the under-door gap — reducing the passage of hallway, street, and adjacent room noise into the sealed space for the quieter, more private indoor environment that bedrooms, home offices, and study rooms benefit from throughout daily work, sleep, and focused activity periods when acoustic separation from surrounding household noise improves comfort and productivity.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePEEL-AND-STICK REMOVABLE INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe velcro adhesive mounting system attaches firmly during use and removes cleanly when repositioning is needed — allowing seasonal removal for summer storage when draught sealing is unnecessary, relocation between different doors based on changing seasonal draught patterns, and complete removal without the adhesive residue and surface damage that permanent adhesive tape and screw-fixed draught excluders leave behind during removal from door surfaces.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDUST AND PARTICULATE EXCLUSION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe continuous under-door seal prevents the fine dust, pollen, pet hair, and outdoor particulates that infiltrate under unsealed doors during wind and pressure differential conditions — maintaining cleaner indoor air quality in the sealed room by blocking the primary entry pathway for floor-level particulates that contribute to dust accumulation on floors and surfaces throughout the rooms with unsealed door gaps during daily household occupation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e93CM STANDARD DOOR COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 93cm total length with double-sided configuration covers standard interior door widths commonly found in residential and commercial properties — the measurement accommodating the typical door leaf widths encountered in bedrooms, living rooms, offices, and utility rooms without cutting or modification for standard installations, while the scissor-trim capability allows shortening for narrower door widths requiring a reduced length for a clean fitted installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMEET THE DAXENMIX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow do I measure and install the DaxenMix correctly for my door?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMeasure the width of your door at the bottom to confirm the 93cm length is appropriate — trim to fit if your door is narrower than 93cm using scissors for a clean cut. Clean the door surface at the installation position thoroughly, peel the adhesive backing from the velcro strip, press firmly to the door bottom face at the desired position, and attach the draught stopper body to the velcro. Press along the full length to ensure complete adhesive contact before first use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes the velcro adhesive damage painted or varnished door surfaces on removal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe velcro peel-and-stick system is designed for damage-free removal from typical painted and varnished door surfaces — the velcro backing leaves the door surface intact when removed carefully without excessive force during repositioning and seasonal removal. On delicate or freshly painted surfaces, test adhesion and removal on a small inconspicuous area before full installation to confirm the specific surface coating in your property handles the velcro adhesive without finish damage during removal.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan it be trimmed to fit narrower doors shorter than 93cm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes. The leather and sponge construction cuts cleanly with sharp household scissors to the required length for doors narrower than the standard 93cm — measure accurately before cutting and trim both the velcro strip and the draught stopper body to matching lengths for a neat fitted installation on non-standard door widths encountered in older properties and converted spaces with door dimensions outside the standard modern specification.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes the double-sided design work when the door swings open over the stopper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe velcro attachment allows the draught stopper to move with the door during opening and closing rather than remaining fixed to the floor — the stopper stays attached to the door face and lifts with door movement rather than dragging along the floor, maintaining the sealing position when the door closes and preventing the floor dragging that floor-mounted draught excluders experience during repeated daily door operation cycles.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow thick is the sponge filling and what gap sizes does it effectively seal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 3cm diameter filling provides meaningful compression for sealing under-door gaps within the range that typical residential doors present above the floor — most standard residential interior doors have gaps between 5mm and 15mm that the sponge compression accommodates effectively during installation. For very large gaps significantly exceeding 15mm, the compression range of standard sponge filling may not provide complete sealing contact across the full gap depth during normal installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan it be used on exterior doors exposed to rain and outdoor conditions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe leather exterior provides meaningful weather resistance for exterior door use — protecting the sponge core from direct rain contact and resisting the moisture exposure that outdoor door bottom positions encounter during rainfall events. For permanently exposed exterior positions receiving direct driving rain, the leather surface handles moderate exposure while the velcro adhesive bond on the door face may require periodic checking and reattachment if moisture infiltration affects the adhesive contact area during extended wet weather periods\u003c\/p\u003e","brand":"Elite5Choice","offers":[{"title":"Brown","offer_id":57546345644198,"sku":"SPUK01379307-BR","price":78.0,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57546345676966,"sku":"SPUK01379307-BL","price":78.0,"currency_code":"GBP","in_stock":true},{"title":"Gray","offer_id":57546345709734,"sku":"SPUK01379307-G","price":78.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57546345742502,"sku":"SPUK01379307-W","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/7693\/6870\/files\/daxen-mix-img-10.jpg?v=1771844654","url":"https:\/\/www.elite5choice.com\/products\/daxenmix-double-sided-design","provider":"Elite5Choice","version":"1.0","type":"link"}