Use Your Existing DeWalt Battery For A Powerful Cordless Glue Gun With No Extra Cables Or Power Outlets Using The Ferrenlok 100W Hot Glue Gun

Compatible with DeWalt 18–21V lithium-ion batteries, 100W output for smooth 0.63 oz/min glue flow, ready in 5 minutes, insulated anti-drip aluminium nozzle, silicone heat-resistant tip cover, low-voltage and overheating protection, and 12 full-size 11mm glue sticks included — the Ferrenlok works straight off the DeWalt batteries you already own.

Always Reaching For A Power Outlet Or Untangling A Cord Whenever You Need To Glue Something?

The Ferrenlok runs entirely on a DeWalt 18–21V lithium-ion battery you already own — no cord, no outlet, no cable management. Take it anywhere on the workbench, in the garage, or outdoors and move freely without dragging a lead behind you.

Frustrated By Glue Guns That Drip, Clog, Or Cool Down Too Slowly Between Uses?

The aluminium insulated anti-drip nozzle reduces glue spillage and waste by up to 15%, the fast 5-minute heat-up prevents glue from cooling and hardening in the nozzle, and the 100W heating system delivers consistent flow without the fluctuations that cause uneven adhesion.

Worried About Overheating Or Draining Your DeWalt Battery Prematurely?

Built-in low-voltage protection, overheating protection, and short-circuit protection safeguard both the gun and your battery throughout use — no risk of damage to the battery, the tool, or your work.

• 100W Power For Smooth 0.63 oz/Min Glue Output With Strong Consistent Adhesion
• Compatible With DeWalt 18–21V Li-Ion Batteries (DCB206, DCB205, DCB204, DCB200, And More)
• Ready In 5 Minutes — Anti-Drip Aluminium Nozzle Reduces Glue Waste By Up To 15%
• Low-Voltage, Overheating, And Short-Circuit Protection — 12 Full-Size 11mm Glue Sticks Included

WHY CHOOSE FERRENLOK

DEWALT BATTERY COMPATIBILITY

Plug directly into any DeWalt 18–21V lithium-ion battery (DCB206, DCB205, DCB204, DCB181, DCB182, DCB200, DCB203) and start working immediately — if you already own DeWalt tools you already have the power source, saving the cost of a separate battery.

FAST 5-MINUTE HEAT-UP

Reaches working temperature in 5 minutes, which is fast enough to prevent glue from cooling and hardening in the nozzle between sessions — reducing clogs and keeping output consistent from the first trigger pull.

ANTI-DRIP INSULATED NOZZLE

The aluminium insulated nozzle and anti-drip design reduce glue spillage by up to 15%, keeping your work area cleaner and making each stick go further without the mess of constant drips between applications.

FULL BATTERY PROTECTION SYSTEM

Low-voltage protection prevents deep discharge that damages battery cells, overheating protection shuts down before temperatures reach dangerous levels, and short-circuit protection covers accidental electrical faults — comprehensive safety for both the tool and your DeWalt battery.

SILICONE HEAT-RESISTANT TIP COVER

The black silicone tip cover provides a heat-resistant barrier that protects against accidental burns during use — an important safety feature for extended work sessions and anyone using the gun in a busy workshop.

LED INDICATOR AND ON/OFF SWITCH

The LED working indicator confirms the gun is powered on, while the handle-mounted on/off switch lets you cut power between tasks without removing the battery — practical control for real-world use.

MEET THE FERRENLOK HOT GLUE GUN

Frequently Asked Questions

Does the battery come with the gun?

No — the Ferrenlok is a tool-only purchase. The package includes the cordless glue gun, 12 full-size 11mm glue sticks, and a user manual. A DeWalt 18–21V lithium-ion battery is required and must be purchased separately if you do not already own one.

Which DeWalt batteries does it fit?

Compatible with DeWalt 18–21V lithium-ion batteries including DCB206, DCB205, DCB204, DCB181, DCB182, DCB200, and DCB203.

What size glue sticks does it take?

Full-size 11mm (0.43 inch) glue sticks. Any standard full-size glue stick of this diameter will work with the Ferrenlok.

How fast does it heat up?

Working temperature is reached in approximately 5 minutes, which also prevents glue from cooling and hardening in the nozzle before use.

How do I change a glue stick?

Do not pull out an unfinished glue stick while the gun is on, as this can cause the glue to stick inside the tube and block the nozzle. Switch off the gun first, allow it to cool slightly, then replace the stick safely.

What safety features does it have?

Low-voltage protection prevents battery damage, overheating protection shuts the gun down before dangerous temperatures are reached, and short-circuit protection covers electrical faults. The silicone tip cover and insulated nozzle protect against burns and drips during use.

How should I hold the gun during use?

Always keep the nozzle level or pointing downward during use — do not operate with the nozzle pointing upward, as this causes glue to flow backwards into the mechanism. Do not touch the nozzle or hot glue directly during operation